Wednesday, December 25, 2024
New Wave Media

June 14, 2017

US Coast Guard Shipwreck Found – 100 Years Later

  • In 1914, USRC Cutter McCulloch was ordered to Mare Island Navy Shipyard where the cutter’s boilers were replaced, the mainmast was removed and the bowsprit shortened. In 1915, McCulloch became a US Coast Guard Cutter when the US Revenue Cutter Service and US Life-Saving Service were combined to create the United States Coast Guard. (Credit: Gary Fabian Collection)
  • A circular skylight collapsed inside the officer’s quarters in the stern of the shipwreck USCG Cutter McCulloch. To the right of the skylight is a sounding machine that was used to determine the depth of water and was once located on the upper poop deck. The wreck provides habitat for various species of marine life, including vermillion rockfish. (Credit: NOAA/USCG/VideoRay)
  • Multibeam sonar image processed by Gary Fabian show the shipwreck USCG Cutter McCulloch. The survey was conducted in 2015 off Ocean Exploration Trust’s vessel E/V Nautilus for NOAA’s Office of National Marine Sanctuaries. (Photo: E/V Nautilus Multibeam Sonar Survey 2015)
  • USRC Cutter McCulloch was constructed by William Cramp and Sons Ship and Engine Building Company in Philadelphia. Launched in 1896, it was the largest cutter built to date at a cost of over $200,000. McCulloch maintained the distinction as the largest revenue cutter, and later USCG cutter, during its 20-year career. (Credit: Mare Island Museum)
  • A key diagnostic artifact discovered at the shipwreck site of the USCG Cutter McCulloch is a 6-pounder gun mounted in the sponson located at the starboard bow. The cutter was equipped with four 6-pounder, 3-inch rapid firing guns arranged in sponsons and located in the bow and stern quarters of the ship. The USRC Cutter McCulloch used its starboard guns to fire upon the Spanish gun battery on El Fraile Rock, just before the commencement of the Battle at Manila Bay. (Credit: NOAA/USCG/VideoRay)
  • NOAA R/V Shearwater (right) and USCG Cutter Halibut (left) conduct remotely operated vehicle (ROV) operations over the USCG Cutter McCulloch shipwreck site. (Credit: Robert V. Schwemmer NOAA)
  • VideoRay Mission Specialist remotely operated vehicle (ROV) on board the NOAA R/V Shearwater. (Credit: Robert V. Schwemmer NOAA)
  • Battle of Manila Bay, May 1, 1898, with Manila Philippines, in the top center, and the Spanish fleet in the upper right. Ships listed descending on the left to bottom: cutter USRC Cutter McCulloch; gunboats USS Petrel and USS Concord; protected cruisers USS Boston, USS Raleigh, USS Baltimore, and USS Olympia flagship, signaling "Remember the Maine." (Credit: Library of Congress)
  • Fathometer image taken on board NOAA’s Channel Islands National Marine Sanctuary research vessel Shearwater in 2014 shows depth soundings over the shipwreck USCG Cutter McCulloch. (Credit: Robert V. Schwemmer NOAA)
  • In 1914, USRC Cutter McCulloch was ordered to Mare Island Navy Shipyard where the cutter’s boilers were replaced, the mainmast was removed and the bowsprit shortened. In 1915, McCulloch became a US Coast Guard Cutter when the US Revenue Cutter Service and US Life-Saving Service were combined to create the United States Coast Guard. (Credit: Gary Fabian Collection) In 1914, USRC Cutter McCulloch was ordered to Mare Island Navy Shipyard where the cutter’s boilers were replaced, the mainmast was removed and the bowsprit shortened. In 1915, McCulloch became a US Coast Guard Cutter when the US Revenue Cutter Service and US Life-Saving Service were combined to create the United States Coast Guard. (Credit: Gary Fabian Collection)
  • A circular skylight collapsed inside the officer’s quarters in the stern of the shipwreck USCG Cutter McCulloch. To the right of the skylight is a sounding machine that was used to determine the depth of water and was once located on the upper poop deck. The wreck provides habitat for various species of marine life, including vermillion rockfish. (Credit: NOAA/USCG/VideoRay) A circular skylight collapsed inside the officer’s quarters in the stern of the shipwreck USCG Cutter McCulloch. To the right of the skylight is a sounding machine that was used to determine the depth of water and was once located on the upper poop deck. The wreck provides habitat for various species of marine life, including vermillion rockfish. (Credit: NOAA/USCG/VideoRay)
  • Multibeam sonar image processed by Gary Fabian show the shipwreck USCG Cutter McCulloch. The survey was conducted in 2015 off Ocean Exploration Trust’s vessel E/V Nautilus for NOAA’s Office of National Marine Sanctuaries. (Photo: E/V Nautilus Multibeam Sonar Survey 2015) Multibeam sonar image processed by Gary Fabian show the shipwreck USCG Cutter McCulloch. The survey was conducted in 2015 off Ocean Exploration Trust’s vessel E/V Nautilus for NOAA’s Office of National Marine Sanctuaries. (Photo: E/V Nautilus Multibeam Sonar Survey 2015)
  • USRC Cutter McCulloch was constructed by William Cramp and Sons Ship and Engine Building Company in Philadelphia. Launched in 1896, it was the largest cutter built to date at a cost of over $200,000. McCulloch maintained the distinction as the largest revenue cutter, and later USCG cutter, during its 20-year career. (Credit: Mare Island Museum) USRC Cutter McCulloch was constructed by William Cramp and Sons Ship and Engine Building Company in Philadelphia. Launched in 1896, it was the largest cutter built to date at a cost of over $200,000. McCulloch maintained the distinction as the largest revenue cutter, and later USCG cutter, during its 20-year career. (Credit: Mare Island Museum)
  • A key diagnostic artifact discovered at the shipwreck site of the USCG Cutter McCulloch is a 6-pounder gun mounted in the sponson located at the starboard bow. The cutter was equipped with four 6-pounder, 3-inch rapid firing guns arranged in sponsons and located in the bow and stern quarters of the ship. The USRC Cutter McCulloch used its starboard guns to fire upon the Spanish gun battery on El Fraile Rock, just before the commencement of the Battle at Manila Bay. (Credit: NOAA/USCG/VideoRay) A key diagnostic artifact discovered at the shipwreck site of the USCG Cutter McCulloch is a 6-pounder gun mounted in the sponson located at the starboard bow. The cutter was equipped with four 6-pounder, 3-inch rapid firing guns arranged in sponsons and located in the bow and stern quarters of the ship. The USRC Cutter McCulloch used its starboard guns to fire upon the Spanish gun battery on El Fraile Rock, just before the commencement of the Battle at Manila Bay. (Credit: NOAA/USCG/VideoRay)
  • NOAA R/V Shearwater (right) and USCG Cutter Halibut (left) conduct remotely operated vehicle (ROV) operations over the USCG Cutter McCulloch shipwreck site. (Credit: Robert V. Schwemmer NOAA) NOAA R/V Shearwater (right) and USCG Cutter Halibut (left) conduct remotely operated vehicle (ROV) operations over the USCG Cutter McCulloch shipwreck site. (Credit: Robert V. Schwemmer NOAA)
  • VideoRay Mission Specialist remotely operated vehicle (ROV) on board the NOAA R/V Shearwater. (Credit: Robert V. Schwemmer NOAA) VideoRay Mission Specialist remotely operated vehicle (ROV) on board the NOAA R/V Shearwater. (Credit: Robert V. Schwemmer NOAA)
  • Battle of Manila Bay, May 1, 1898, with Manila Philippines, in the top center, and the Spanish fleet in the upper right. Ships listed descending on the left to bottom: cutter USRC Cutter McCulloch; gunboats USS Petrel and USS Concord; protected cruisers USS Boston, USS Raleigh, USS Baltimore, and USS Olympia flagship, signaling "Remember the Maine." (Credit: Library of Congress) Battle of Manila Bay, May 1, 1898, with Manila Philippines, in the top center, and the Spanish fleet in the upper right. Ships listed descending on the left to bottom: cutter USRC Cutter McCulloch; gunboats USS Petrel and USS Concord; protected cruisers USS Boston, USS Raleigh, USS Baltimore, and USS Olympia flagship, signaling "Remember the Maine." (Credit: Library of Congress)
  • Fathometer image taken on board NOAA’s Channel Islands National Marine Sanctuary research vessel Shearwater in 2014 shows depth soundings over the shipwreck USCG Cutter McCulloch. (Credit: Robert V. Schwemmer NOAA) Fathometer image taken on board NOAA’s Channel Islands National Marine Sanctuary research vessel Shearwater in 2014 shows depth soundings over the shipwreck USCG Cutter McCulloch. (Credit: Robert V. Schwemmer NOAA)

 The shipwreck remains of a historic U.S. Coast Guard cutter have been discovered off of Southern California 100 years after the vessel was lost at sea.

 
In its heyday, the Coast Guard Cutter McCulloch – commissioned in 1897 as a cruising cutter for the U.S. Treasury’s Revenue Cutter Service, a predecessor of the Coast Guard – saw its share of action, having served with Commodore George Dewey in the Battle of Manila Bay in 1898 as part of the U.S. Asiatic Squadron that destroyed the Spanish Pacific fleet in the first major battle of the Spanish-American War.
 
Twenty years later, on June 13, 1917, the McCulloch sank after colliding with passenger steamship SS Governor in dense fog off Point Conception. McCulloch’s crew entire crew was rescued and taken aboard the Governor, but the ship’s acting water tender died days later from injuries he suffered in the collision.
 
Now, a century later, the shipwreck remains have been discovered by a U.S. Coast Guard and NOAA research team in the Pacific Ocean off Point Conception in Southern California.
 
Officials from the two agencies and the San Francisco Maritime National Historical Park paid tribute to the cutter and its crews on June 13, 2017 at the park’s Maritime Research Center at Fort Mason while announcing of the discovery of the shipwreck.
 
“McCulloch and her crew were fine examples of the Coast Guard’s long-standing multi-mission success from a pivotal naval battle with Commodore Dewey, to safety patrols off the coast of California, to protecting fur seals in the Pribilof Islands in Alaska,” said Rear Admiral Todd Sokalzuk, the commander of the 11th Coast Guard District. “The men and women who crew our newest cutters are inspired by the exploits of great ships and courageous crews like the McCulloch. I extend the Coast Guard’s heartfelt thanks to our partners in the National Oceanic and Atmospheric Administration for helping us locate this important piece of our heritage and assisting us in preserving its legacy.”
 
At the time of its construction, McCulloch was the largest cutter built at a cost of nearly $200,000. The ship was equipped with a steam engine and three masts rigged with sails, giving it a cruising speed of 17 knots. The cutter’s armament included four 6-pounder 3-inch rapid firing guns and one 15-inch torpedo tube.
 
Following the Spanish-American War, McCulloch patrolled out of its homeport of San Francisco, cruising the Pacific Ocean from the Mexican border to Cape Blanco, Ore. Built for Bering Sea patrols, the cutter deployed to enforce fur seal regulations in the Pribilof Islands off Alaska and served as a floating courthouse for far-flung Alaskan towns.
 
Last October, a joint NOAA and Coast Guard training mission confirmed the location of McCulloch’s remains. Working off the Channel Islands National Marine Sanctuary’s research vessel Shearwater, the multi-agency science team from NOAA, National Park Service, and Coast Guard Dive Lockers Alameda and San Diego, deployed a VideoRay remotely operated vehicle to survey and characterize the shipwreck. Coast Guard 11th District cutters Halibut and Blacktip provided vessel support. 
 
Cameras mounted on the remotely operated underwater vehicle (ROV) revealed McCulloch on the seabed lying on its port side. The vessel’s wooden hull planking and decks have succumbed to wood-boring organisms, leaving behind the steel skeletal remains of its frames. Marine growth, primarily Metridium anemones, drape the bow’s exterior while various species of marine life, including ling cod and vermillion and copper rockfish, inhabit the site.
 
During the ROV dives the team confirmed a number of diagnostic features consistent with historic photographs and ship’s plans of McCulloch published in 1914 including: the bronze 11-foot propeller; the steam engine and boilers; the engine room skylight; the anchor windlass and capstan; the 15-inch torpedo tube molded in the bow stem; the flying bridge and pilothouse helms; a number of deck skylights; a sounding machine; and three-pounder and six-pounder rapid firing guns arranged in sponsons mounted in the stern and the bow quarters of the ship.
 
“The identification of McCulloch is a result of our excellent collaboration with the Coast Guard, Bathymetric Research and other partners,” said Robert Schwemmer, the West Coast Regional Maritime Heritage Coordinator for NOAA’s Office of National Marine Sanctuaries and chief archeologist for the mission. “This discovery highlights an important chapter in U.S. Coast Guard and Navy history and gives us an opportunity to honor McCulloch’s chief engineer Frank Randall, the only American fatality at the Battle of Manila Bay, and acting water tender John Johansson who died from injuries sustained in the collision with the SS Governor.”
 
McCulloch rests on the ocean floor off of Point Conception near the 1917 collision site. Officials have not determined plans for the next phase of exploration of the shipwreck. McCulloch is not located within a NOAA Marine Sanctuary, but the ship is U.S. government property and is protected under the Sunken Military Craft Act of 2004. No portion of any government wreck may be disturbed or removed.
 
“We are honored to be part of this tribute to the McCulloch, and to the U.S. Coast Guard,” said Kevin Hendricks, superintendent at San Francisco Maritime National Historical Park. “America’s maritime heritage is rich and inspiring, and we must ensure that stories like this are passed down to future generations.” 
AlaskaAmericaBering Sea
Subsea Vehicle technology is front and center in MTR, with a focus on increased levels of autonomy, reliability and flexibility.
Read the Magazine Sponsored by

The Self-propelled MEDUSA Mine System

Marine Technology Magazine Cover Nov 2024 -

Marine Technology Reporter is the world's largest audited subsea industry publication serving the offshore energy, subsea defense and scientific communities.

Subscribe
Marine Technology ENews subscription

Marine Technology ENews is the subsea industry's largest circulation and most authoritative ENews Service, delivered to your Email three times per week

Subscribe for MTR E-news